Figure 69. Installing the FH riser module
Next steps
1.
2.
Install the air shroud (FH sled)
.
3.
4. Follow the procedure listed in
After working inside your system
.
FH riser board
Removing the FH riser board
Prerequisites
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in the
Before working inside your system
3.
.
4.
Remove the air shroud (FH sled)
.
5.
.
6.
Remove the FHFL interposer board
.
Steps
1. Using the Phillips #2 screwdriver, remove the two screws that secure the FH riser board to FH riser module.
2. Lift the FH riser board from the FH riser module.
Installing and removing system components
101
Summary of Contents for EMC PowerEdge XE7440
Page 12: ...System information labels Figure 4 System board connectors 12 PowerEdge XE7440 overview ...
Page 13: ...Figure 5 Express Service Tag PowerEdge XE7440 overview 13 ...
Page 14: ...Figure 6 Memory information 14 PowerEdge XE7440 overview ...
Page 15: ...Figure 7 System tasks PowerEdge XE7440 overview 15 ...
