System health and system ID indicator codes
The system health and system ID indicator is located on the front panel of your system.
Figure 7. System health and system ID indicators
Table 4. System health and system ID indicator codes
System health and system ID indicator code
Condition
Solid blue
Indicates that the system is turned on, system is healthy, and system
ID mode is not active. Press the system health and system ID button
to switch to system ID mode.
Blinking blue
Indicates that the system ID mode is active. Press the system health
and system ID button to switch to system health mode.
Solid amber
Indicates that the system is in fail-safe mode. If the problem persists,
see the Getting help section.
Blinking amber
Indicates that the system is experiencing a fault. Check the System
Event Log for specific error messages. For more information about
error messages, see the
Event and Error Message Reference Guide
for 14th Generation Dell EMC PowerEdge Servers
at
.
Dell EMC PowerEdge T640 overview
15
Summary of Contents for EMC PowerEdge T640 D24XR
Page 23: ...Figure 16 Configuration and layout Dell EMC PowerEdge T640 overview 23 ...
Page 24: ...Figure 17 Electrical overview 24 Dell EMC PowerEdge T640 overview ...
Page 25: ...Figure 18 Memory information Dell EMC PowerEdge T640 overview 25 ...
