Dell EGW-3200 User Manual Download Page 15

Page: 15 / 88

Cellular network configuration

If the optional cellular network (4G or 5G) is used, see the following link for information about configuration and usage.

https://support.microsoft.com/en-us/windows/cellular-settings-in-windows-905568ff-7f31-3013-efc7-3f396ac92cd7

Accessing GPS

Go to the following link for information about accessing the GPS and for various Windows settings.

https://support.microsoft.com/en-us/windows/windows-location-service-and-privacy-3a8eee0a-5b0b-dc07-
eede-2a5ca1c49088

5G module firmware update procedure

Download Firmware Selector Tool and driver

Steps

1. Download the Firmware Selector Tool from the EGW-3200 page of the Dell Technologies

Support Site

2. Unzip the files and open the unzipped folder.

Figure 7. Firmware tool and driver file

3. Save the driver to the following folder:

\F0.1.0.0.9_AP077\SDX55_Thales_USB_x64_20220208_V023_WHQL_INF_Injection\

Figure 8. 5G firmware driver

4. Save the

Firmware Selector Tool

to the following folder:

\F0.1.0.0.9_AP077 \x64-F0.1.0.0.9

(AP077)_FST_Thales_20220119\Utilities\x86-Firmware Selector Tool (V2.0.3.3)_Thales

Setting Up the Windows 10 Operating System

Summary of Contents for EGW-3200

























































































Search results

Summary of Contents for EGW-3200

Reviews:

Related manuals for EGW-3200

Brands by name

Popular brands

Dell EGW-3200, User Manual

Search results

Summary of Contents for EGW-3200

Reviews:

Related manuals for EGW-3200

Brands by name

Popular brands