Dell E76S, Installation And Service Manual, Page: 147 / 187

Figure 150. Set the anti-tilt wires to the locked position and tightening the nuts
Next steps
1. Install the air shroud .
2. Follow the procedure listed in After working inside your system .
Optional OCP card
Removing the OCP card
Prerequisites
1. Follow the safety guidelines listed in Safety instructions .
2. Follow the procedure that is listed in Before working inside your system .
3. Remove the air shroud .
Steps
1. Slide the OCP air shroud toward the front of the system and lift the OCP air shroud out of the system.
Installing and removing system components 147