Figure 105. Installing the cooling fan cage board
Next steps
1. Connect cables to the fan board.
2. Replace the following components:
a.
b.
3. Follow the procedure listed in
After working inside your system
.
System board
This is a service technician replaceable part only.
Removing the system board
Prerequisites
CAUTION:
If you are using the Trusted Platform Module (TPM) with an encryption key, you may be prompted
to create a recovery key during program or System Setup. Be sure to create and safely store this recovery key.
If you replace this system board, you must supply the recovery key when you restart your system or program
before you can access the encrypted data on your drives.
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in the
Before working inside your system
3. Remove the following components:
a.
b.
c.
d.
e.
Internal USB key (if installed)
f.
Processor and heat sink module
g.
h.
106
Installing and removing system components
Summary of Contents for E75S Series
Page 16: ...Figure 10 Service information 16 System overview ...
Page 17: ...Figure 11 Service information System overview 17 ...
Page 18: ...Figure 12 Memory information Figure 13 Configuration and layout 18 System overview ...
Page 19: ...Figure 14 Configuration and layout Figure 15 LED behavior System overview 19 ...