Dell E74S Reference Manual Download

Page: 25 / 25

Table 26. Boot Manager details (continued)

Option

Description

One-shot Boot Menu

Enables you to access boot menu, where you can select a one-time boot device
to boot from.

Launch System Setup

Enables you to access System Setup.

Launch Lifecycle Controller

Exits the Boot Manager and invokes the Dell Lifecycle Controller program.

System Utilities

Enables you to launch System Utilities menu such as Launch Diagnostics, BIOS
update File Explorer, Reboot System.

PXE boot

You can use the Preboot Execution Environment (PXE) option to boot and configure the networked systems remotely.

To access the

PXE boot

option, boot the system and then press F12 during POST instead of using standard Boot Sequence

from BIOS Setup. It does not pull any menu or allows managing of network devices.

Pre-operating system management applications

Summary of Contents for E74S


























Search results

Summary of Contents for E74S

Reviews:

Related manuals for E74S

Brands by name

Popular brands

Dell E74S, Reference Manual

Search results

Summary of Contents for E74S

Reviews:

Related manuals for E74S

Brands by name

Popular brands