Dell E68S, Installation And Service Manual

Page: 173 / 194

Table 34. Cooling fan and foam requirement matrix
System configuration Cooling fan Foam requirement
8 x 2.5-inch NVMe High performance (silver grade) fan Not required
16 x 2.5-inch SAS/SATA High performance (silver grade) fan Not required
16 x 2.5-inch SAS/SATA + 8 NVMe High-performance (gold grade) fan Required
16 x 2.5-inch NVMe High-performance (gold grade) fan Required
8 x 3.5-inch SAS/SATA High performance (silver grade) fan Required
NOTE: 12 x 3.5-inch and 24 x 2.5-inch NVMe system do not support GPU/FPGA card.
2. Remove the heat sink and install the required L-type heat sink .
NOTE: All GPU/FPGA cards require L-type heat sink and GPU shroud, irrespective of the length.
3. Remove the air shroud and install the GPU air shroud .
4. Remove the GPU air shroud top cover .
NOTE: The GPU air shroud top cover is part of the GPU air shroud.
5. Install the GPU .
Refer to the riser and GPU slot configuration table to know about the slots for the GPU installation.
Table 35. Riser and GPU slot configuration
Riser Riser slots Processor System riser
configuration
Riser/card type GPU slots
Riser 1 Slot 1 Processor 1 Configuration 3 R1A - FH/FL or HL 2
Slot 2 Processor 1 Configuration 6 R1C - FH/HL 1, 2
Riser 2 Slot 3 Processor 1 Configuration 3 or 6 R2A - HH/HL 3, 6
Slot 6 Processor 2
Riser 3 Slot 5 Processor 2 Configuration 3 R3A - FH/FL or HL 5
Configuration 6 R3A - FH/HL
Riser 4 Slot 7 Processor 2 Configuration 3 R4A - FH/FL or HL 7
Slot 8 Configuration 6 R4C - FH/HL 7, 8
FH - Full Height, FL - Full Length, HH - Half Height, HL - Half Length
NOTE: For information on riser slot location on the system board, see the System board jumpers and connectors topic.
6. If applicable, connect the power cables to the GPU. To know the connectors for GPU on the system board, see the System
board jumpers and connectors topic.
Refer to the GPU power cable matrix to know about the requirement of cable for the GPU.
Table 36. GPU power cable matrix
Category Description Type Vendor Cable Cable quantity
GPU CRD,GRPHC,NVIDIA,
T4,16GB,70W,L HH and HL NVIDIA Not required Not required
GPU CRD,GRPHC,32GB,2
25W,M10,PASSIV FH and FL NVIDIA 6 + 2 pin cable 1 piece per GPU riser
GPU CRD,GRPHC,16GB,2
50W,V100,FF3.0 FH and FL NVIDIA 8 pin cable 1 piece per GPU riser
GPU CRD,GRPHC,32GB,2
50W,V100S,PCIE FH and FL NVIDIA 8 pin cable 1 piece per GPU riser
Upgrade Kits 173