manualshive.com logo in svg

Dell E43S Series, Installation And Service Manual

Share
Download
Dell E43S Series Installation And Service Manual Download Page 8

Item

Indicator, button, or connector

Icon

Description

6

iDRAC or NIC port

Enables you to remotely access iDRAC. For more information, 
see the iDRAC User’s Guide at 

Dell.com/poweredgemanuals

.

7

mini display port

Enables you to connect a display device to the system. For more 
information, see 

Technical specifications

.

8

iDRAC Direct micro USB port

Enables you to connect a portable device to the sled.

9

OCP card slot

N/A

Enables you to connect Open Compute Project (OCP) 
expansion cards. For more information, see 

Technical 

specifications

.

10

EST pull out tab

N/A

This tab has the unique Express Service Code, Service Tag, and 
MAC address labels.

11

system id indicator

The System Identification (ID) LED is available on the back of 
the system. Press the system ID button on the front of the 
enclosure to identify a system in a rack.

12

USB 3.0 port (2)

The USB ports are 9-pin and 3.0-compliant. These ports enable 

you to connect USB devices to the system.

Network ports indicator codes

Figure 2. LAN indicators on the QSFP carrier card

1

Link indicator

8

XC6420 Series overview

Summary of Contents for E43S Series




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands