manualshive.com logo in svg

Dell E43S Series, Installation And Service Manual

Share
Download
Dell E43S Series Installation And Service Manual Download Page 47

iDRAC Settings utility

The iDRAC settings utility is an interface to set up and configure the iDRAC parameters by using UEFI. You can enable or disable various 
iDRAC parameters by using the iDRAC settings utility.

NOTE: 

The XC Series system does not support the NVDIMM-N, RAID, or UEFI settings.

NOTE: 

Accessing some of the features on the iDRAC settings utility needs the iDRAC Enterprise License upgrade.

For more information about using iDRAC, see 

Dell Integrated Dell Remote Access Controller User's Guide

 at 

Dell.com/idracmanuals

.

Device Settings

Device Settings

 enables you to configure device parameters.

Dell Lifecycle Controller

Dell Lifecycle Controller (LC) provides advanced embedded systems management capabilities including system deployment, configuration,

 

update, maintenance, and diagnosis. LC is delivered as part of the iDRAC out-of-band solution and Dell system embedded Unified

 

Extensible Firmware Interface (UEFI) applications.

NOTE: 

The XC Series system does not support the NVDIMM-N, RAID, or UEFI settings.

Embedded systems management

The Dell Lifecycle Controller provides advanced embedded systems management throughout the system’s lifecycle. The Dell Lifecycle 
Controller can be started during the boot sequence and can function independently of the operating system.

NOTE: 

Certain platform configurations may not support the full set of features provided by the Dell Lifecycle Controller.

For more information about setting up the Dell Lifecycle Controller, configuring hardware and firmware, and deploying the operating system, 
see the Dell Lifecycle Controller documentation at 

Dell.com/idracmanuals

.

Boot Manager

The 

Boot Manager

 screen enables you to select boot options and diagnostic utilities.

NOTE: 

The XC Series system does not support the NVDIMM-N, RAID, or UEFI settings.

Viewing Boot Manager

About this task

To enter Boot Manager:

Steps

1 

Turn on, or restart your system.

2 

Press F11 when you see the following message:

F11 = Boot Manager

Pre-operating system management applications

47

Summary of Contents for E43S Series




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands