Figure 55. Removing and installing the system battery
1.
positive side of battery
2. socket
3.
To install a new system battery, hold the battery with the positive facing up and slide it under the
securing tabs.
4.
Press the battery into the connector until it snaps into place.
Next steps
1.
Install the cooling shroud.
2.
Follow the procedure listed in
After working inside your system
.
3.
While booting, press <F2> to enter the System Setup and ensure the battery is operating properly.
4.
Enter the correct time and date in the System Setup
Time
and
Date
fields.
5.
Exit the System Setup.
Related Links
Removing the cooling shroud
Installing the cooling shroud
Control panel assembly
Removing the control panel assembly
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
.
2.
Keep the #2 Phillips screwdriver ready.
129
