NOTE:
The slot is keyed to ensure correct insertion of the card.
2. Press the card into the card slot to lock it into place.
Figure 77. Installing internal SD card.
1. Internal Dual SD module
2. SD card 1
3. SD card 2
4. SD card slot 2
5. SD card slot 1
Next steps
Processors and heat sinks
Use the following procedures when:
●
Removing and installing a heat sink
●
Installing an additional processor
●
Replacing a processor
NOTE:
To ensure proper cooling, you must install a processor blank in any empty processor socket.
Removing a heat sink
Prerequisites
CAUTION:
Never remove the heat sink from a processor unless you intend to remove the processor. The heat
sink is necessary to maintain proper thermal conditions.
WARNING:
The heat sink is hot to touch. Allow the heat sink to cool for some time after powering down the
system.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
136
Installing and removing system components
