If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in
use. This is referred to as 'Power Save Mode'*. If input from keyboard, mouse, or other input devices is detected by the computer, the monitor automatically
'wakes up'. The following table shows the power consumption and signaling of this automatic power saving feature:
Activate the computer and 'wake up' the monitor to gain access to the
OSD
.
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
Pin Assignments
15-pin D-Sub connector
24-pin Digital-Only DVI Connector
VESA Modes
Horizontal Sync
Vertical Sync Video
Power Indicator
Power Consumption
Normal operation Active
Active
Active
Green
45 W (typical)
Active-off mode
Inactive
Inactive
Blanked Amber
Less than 2 W
Switch off
-
-
-
Off
Less than 1 W
NOTE: The OSD only functions in the 'normal operation' mode. One of the following messages appears when the
“
menu
”
or
“
plus
”
buttons are pressed
when in Active-off mode.
1: Auto detect
In Power Save Mode
Press computer power button
or any key on keyboard or move mouse
or
2: Analog Input
In Power Save Mode
Press computer power button
or any key on keyboard or move mouse
or
3: Digital Input
In Power Save Mode
Press computer power button
or any key on keyboard or move mouse
This monitor is
ENERGY STAR
®
-compliant as well as TCO '99 power management compatible.
Pin Number
Monitor Side of the 15-pin Side Signal Cable
1
Video-Red
2
Video-Green
3
Video-Blue
4
GND
5
Self-test
6
GND-R
7
GND-G
8
GND-B
9
DDC +5V
10
GND-sync
11
GND
12
DDC data
13
H-sync
14
V-sync
15
DDC clock
