Dell E1916HL Page 6 User Manual Download | Manualshive

Page: 6 / 62

background image

About Your Monitor

Product Features

The Dell E1916HV / E1916HL / E1916HM / E2016HV / E2016HL / E2016HM / E2216HV
/ E2216HVM flat-panel display has an active matrix, Thin-Film Transistor, Liquid Crystal
Display and LED backlight.
The monitor’s features include:

• E1916HV / E1916HL / E1916HM: 47.01 cm (18.51 in.) diagonal viewable image size,

1366 x 768 resolution, plus full-screen support for lower resolutions.

• E2016HV / E2016HL / E2016HM: 49.41 cm (19.5 in.) diagonal viewable image size,

1600 x 900 resolution, plus full-screen support for lower resolutions.

• E2216HV / E2216HVM: 54.69 cm (21.53 in.) diagonal viewable image size,

1920 x 1080 resolution, plus full-screen support for lower resolutions.

• Tilt adjustment capability.
• Removable pedestal and Video Electronics Standards Association (VESA) 100 mm

mounting holes for flexible mounting solutions.

•  Plug and play capability if supported by your system.
•  On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.
•  Security lock slot.
•  Asset Management Capability.
•  CECP (for China)

.

•  RoHS compliant.
•  Energy Gauge shows the energy level being consumed by the monitor in real time.
•  Analog backlight dimming control for flicker free display.

«
...
4
5
6
7
8
...
»

Summary of Contents for E1916HL































































Reviews:

No comments

Related manuals for E1916HL

Brand: NAiS Pages: 208

Brand: FDI Pages: 2

Brand: Trane Pages: 68

Brand: Digitensio Pages: 70

Brand: AOC Pages: 61

Brand: ViewSonic Pages: 21

COST CONTROL 3362

Brand: La Crosse Technology Pages: 18

Brand: EYEZONE Pages: 16

Brand: Lumiscope Pages: 14

Brand: YAKUMO Pages: 23

Brand: Plura Pages: 46

Brand: B-phone Pages: 12

Brand: Zenith Pages: 38

Brand: TETRALEC Pages: 23

Brand: TRANSTEK Pages: 16

Brand: OiTEZ Pages: 24

Brand: AccuMed Pages: 15

Brand: Barco Pages: 62

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands