Dell DIMENSION XPS GEN 3 WHL Page 86 User Manual Download

Page: 86 / 144

Removing and Installing Parts

www

.dell.com | support.dell.com

Install the hard drive into the computer by gently sliding the drive into place until the tabs
securely click into position.

NOTE:

If you are installing a hard drive in the lower bay, place the drive in the bay so that the power

connector is on the left-hand side (opposite of the top hard drive)

Connect a power cable to the drive.

Connect the hard-drive cable to the drive and to the system board (see page 69).

Check all connectors to be certain that they are properly cabled and firmly seated.

drive

screws (4)

bracket rails (2)

hard drive

hard-drive cable

power cable

tabs (2)

system board connector

Summary of Contents for DIMENSION XPS GEN 3 WHL

















































































































































Search results

Summary of Contents for DIMENSION XPS GEN 3 WHL

Reviews:

Related manuals for DIMENSION XPS GEN 3 WHL

Brands by name

Popular brands

Dell DIMENSION XPS GEN 3 WHL, User Manual

Search results

Summary of Contents for DIMENSION XPS GEN 3 WHL

Reviews:

Related manuals for DIMENSION XPS GEN 3 WHL

Brands by name

Popular brands