Dell d400 - Latitude - Pentium M 1.3 GHz Service Manual Download

Page: 5 / 78

Before You Begin: Dell Latitude D400 Service Manual

6. To avoid possible damage to the system board, wait 10 to 20 seconds and then disconnect any

attached devices.

7. Disconnect all other external cables from the computer.

8. Remove any installed PC Cards from the PC Card slot.

9. Close the display and turn the computer upside down on a flat work surface.

NOTICE:

To avoid damaging the system board, you must remove the main battery before you

service the computer.

10. Slide and hold the battery-bay latch release on the bottom of the computer, and then remove

the battery from the bay.

Recommended Tools

The procedures in this manual require the following tools:

●

Phillips screwdriver

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...ok/Latitude/D400/D400_SERVICE_MANUAL/begin.htm (2 of 6)6/21/2004 1:56:01 AM

Summary of Contents for d400 - Latitude - Pentium M 1.3 GHz















































































Search results

Summary of Contents for d400 - Latitude - Pentium M 1.3 GHz

Reviews:

Related manuals for d400 - Latitude - Pentium M 1.3 GHz

Brands by name

Popular brands

Dell d400 - Latitude - Pentium M 1.3 GHz, Service Manual

Search results

Summary of Contents for d400 - Latitude - Pentium M 1.3 GHz

Reviews:

Related manuals for d400 - Latitude - Pentium M 1.3 GHz

Brands by name

Popular brands