manualshive.com logo in svg

Dell D2720DS, User Manual

Share
Download
Dell D2720DS User Manual Download Page 24

24        |       Operating the Monitor

Using the On-Screen Display (OSD) Menu

Accessing the Menu System

  

NOTE:

 Any changes you make using the OSD menu are automatically saved if  

        you move to another OSD menu, exit the OSD menu, or wait for the OSD menu 
        to disappear.

  

   

  Press the 

MENU

 button to launch the OSD menu and display the main menu.                             

          

                

Icon

Menu and 

Submenus

Description

Picture

Use this menu to activate 

Brightness/Contrast/Color Temp.

 

adjustment.

Brightness

Brightness

 adjusts the luminance of the backlight

(minimum 0; maximum 100).
Press the 

-

 button to decrease brightness.

Press the 

+

 button to increase brightness.

Contrast

Adjust the 

Brightness

 first, and then adjust 

Contrast 

only if 

further adjustment is necessary. 

Press the 

+

 button to increase contrast and press the 

-

 

button to decrease contrast (between 0 and 100).
Contrast adjusts the difference between darkness and lightness 

on the monitor.

Summary of Contents for D2720DS






































Reviews:

No comments

Brands by name

Popular brands

Load more brands