Dell D18M Service Manual Download Page 74 | Manualshive

Page: 74 / 81

background image

7. After the download is complete, browse the folder where you saved the BIOS update file.
8. Double-click the BIOS update file icon and follow the on-screen instructions.

For more information, see knowledge base article

at

www.dell.com/support

.

Updating the BIOS in Linux and Ubuntu

To update the system BIOS on a computer that is installed with Linux or Ubuntu, see the knowledge base article

at

www.dell.com/support

Updating the BIOS using the USB drive in Windows

CAUTION:

If BitLocker is not suspended before updating the BIOS, the next time you reboot the system it

will not recognize the BitLocker key. You will then be prompted to enter the recovery key to progress and the
system will ask for this on each reboot. If the recovery key is not known this can result in data loss or an
unnecessary operating system re-install. For more information on this subject, see Knowledge Article:

www.dell.com/support/article/sln153694

1. Follow the procedure from step 1 to step 6 in

Updating the BIOS in Windows

to download the latest BIOS setup program file.

2. Create a bootable USB drive. For more information, see the knowledge base article

at

www.dell.com/support

.

3. Copy the BIOS setup program file to the bootable USB drive.
4. Connect the bootable USB drive to the computer that needs the BIOS update.
5. Restart the computer and press

F12

.

6. Select the USB drive from the

One Time Boot Menu

.

7. Type the BIOS setup program filename and press

Enter

.

The

BIOS Update Utility

appears.

8. Follow the on-screen instructions to complete the BIOS update.

Updating the BIOS from the F12 One-Time boot menu

Update your computer BIOS using the BIOS update.exe file that is copied to a FAT32 USB drive and booting from the F12
One-Time boot menu.

CAUTION:

If BitLocker is not suspended before updating the BIOS, the next time you reboot the system it

will not recognize the BitLocker key. You will then be prompted to enter the recovery key to progress and the
system will ask for this on each reboot. If the recovery key is not known this can result in data loss or an
unnecessary operating system re-install. For more information on this subject, see Knowledge Article:

www.dell.com/support/article/sln153694

BIOS Update

You can run the BIOS update file from Windows using a bootable USB drive or you can also update the BIOS from the F12
One-Time boot menu on the computer.

Most of the Dell computers built after 2012 have this capability, and you can confirm by booting your computer to the F12
One-Time Boot Menu to see if BIOS FLASH UPDATE is listed as a boot option for your computer. If the option is listed, then the
BIOS supports this BIOS update option.

NOTE:

Only computers with BIOS Flash Update option in the F12 One-Time boot menu can use this function.

Updating from the One-Time boot menu

To update your BIOS from the F12 One-Time boot menu, you need the following:

●

USB drive formatted to the FAT32 file system (key does not have to be bootable)

●

BIOS executable file that you downloaded from the Dell Support website and copied to the root of the USB drive

●

AC power adapter that is connected to the computer

●

Functional computer battery to flash the BIOS

Perform the following steps to perform the BIOS update flash process from the F12 menu:

74

System setup

«
...
72
73
74
75
76
...
»

Summary of Contents for D18M


















































































Reviews:

No comments

Related manuals for D18M

Brand: BAC Pages: 24

Brand: IBM Pages: 212

9228 - IntelliStation Z - Pro

Brand: IBM Pages: 72

9114-275 - IntelliStation POWER 275

Brand: IBM Pages: 102

8863 - eServer xSeries 366

Brand: IBM Pages: 94

Brand: IBM Pages: 4

Brand: IBM Pages: 84

Brand: IBM Pages: 96

Brand: IBM Pages: 156

Brand: IBM Pages: 178

Brand: IBM Pages: 155

Brand: IBM Pages: 214

Brand: Kontron Embedded Computers Pages: 48

Brand: Asus Pages: 54

Brand: Asus Pages: 70

AAEON BOXER-6710

Brand: Asus Pages: 75

Brand: Asus Pages: 70

Brand: Asus Pages: 50

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands