2.5-inch hard drive assembly
Removing the 2.5–inch drive assembly
Before working inside your computer
.
2. Remove the:
a.
b.
3. Open the
.
4. To remove the drive assembly:
a. Disconnect the drive assembly cables from the connectors on the drive [1] .
b. Press the blue tabs on both sides [2] and pull the drive assembly out of the computer [3].
NOTE:
Gently press the blue tabs to avoid damage to the plastic tabs.
Installing the 2.5-inch drive assembly
1. Insert the drive assembly into the slot on the computer and press until it clicks into place [1,2].
2. Connect the SATA cable and the power cable to the connectors on the drive [3].
20
Disassembly and reassembly
