Dell D16S Service Manual Download Page 65

Page: 65 / 89

About this task

The following images indicate the location of the processor and provide a visual representation of the removal procedure.

Steps

1. Press down and push the release lever away from the processor to release it from the securing tab.
2. Lift the lever upward to lift the processor cover.

CAUTION:

When removing the processor, do not touch any of the pins inside the socket or allow any objects

to fall on the pins in the socket.

3. Gently lift the processor from the processor socket.

Installing the processor

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the processor and provides a visual representation of the installation procedure.

Disassembly and reassembly

Summary of Contents for D16S


























































































Search results

Summary of Contents for D16S

Reviews:

Related manuals for D16S

Brands by name

Popular brands

Dell D16S, Service Manual

Search results

Summary of Contents for D16S

Reviews:

Related manuals for D16S

Brands by name

Popular brands