Dell D11S Owner'S Manual Download Page 62

Page: 62 / 78

NOTE:

If you do not have the Service Tag, use the autodetect feature or manually browse for your computer model.

4. Click

Drivers and Downloads

5. Select the operating system installed in your computer.
6. Scroll down the page, expand

Chipset

, and select your chipset driver.

7. Click

Download File

to download the latest version of the chipset driver for your computer.

8. After the download is complete, navigate to the folder where you saved the driver file.
9. Double-click the chipset driver file icon and follow the instructions on the screen.

Intel chipset drivers

Verify if the Intel chipset drivers are already installed in the computer.

NOTE:

Click

Start

Control Panel

Device Manager

In Search the web and Windows, type

Device Manager

Table 22. Intel chipset drivers

Before installation

After installation

Intel HD Graphics drivers

Verify if the Intel HD Graphics drivers are already installed in the computer.

NOTE:

Click

Start

Control Panel

Device Manager.

Tap Search the web and Windows and type

Device Manager

Software

Summary of Contents for D11S















































































Search results

Summary of Contents for D11S

Reviews:

Related manuals for D11S

Brands by name

Popular brands

Dell D11S, Owner'S Manual

Search results

Summary of Contents for D11S

Reviews:

Related manuals for D11S

Brands by name

Popular brands