Dell Chromebook 3100 Service Manual Download Page 13

Page: 13 / 94

7. Input and output board

NOTE:

Dell provides a list of components and their part numbers for the original system configuration purchased. These

parts are available according to warranty coverages purchased by the customer. Contact your Dell sales representative for
purchase options.

Disassembly and reassembly

NOTE:

The images in this document may differ from your computer depending on the configuration you ordered.

Base cover

Removing the base cover

Prerequisites

●

Follow the procedure in

before working inside your computer

About this task

The following images indicate the location of the base cover, and provide a visual representation of the removal procedure.

Removing and installing components

Summary of Contents for Chromebook 3100































































































Search results

Summary of Contents for Chromebook 3100

Reviews:

Related manuals for Chromebook 3100

Brands by name

Popular brands

Dell Chromebook 3100, Service Manual

Search results

Summary of Contents for Chromebook 3100

Reviews:

Related manuals for Chromebook 3100

Brands by name

Popular brands