Dell C9000 series, Reference Manual

Page: 92 / 2286

ftp-server topdir
Specify the top-level directory to be accessed when an incoming FTP connection request is made.
C9000 Series
Syntax
ftp-server topdir directory
Parameters
directory Enter the directory path.
Defaults The internal flash is the default directory.
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information After you enable FTP server functions with the
ftp-server enable
command, Dell
Networking recommends specifying a top-level directory path. Without a top-level
directory path specified, the system directs users to the flash directory when logging in
to the FTP server.
Related
Commands
ftp-server enable — enables FTP server functions on the switch.
ftp-server username — sets a username and password for incoming FTP connections.
Control and Monitoring 92