Dell C9000 series, Reference Manual

Page: 915 / 2286

show redundancy
Display the current redundancy configuration.
C9000 Series
Syntax
show redundancy pe pe-id
From a PE console , use
show redundancy
to view the current high availability (HA)
status for a specified port extender unit.
Parameters
pe pe-id Enter the keyword
pe
and the port extender ID to display the
current redundancy configuration of the specified port extender
unit. Range is from 0 to 255
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(0.0) Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.5.1.0 Introduced on the C-Series.
7.6.1.0 Introduced on the E-Series.
Usage Information To modify your results, use the
show redundancy [pipe]
command, as follows:
•
except
— show only text that doesn not match a pattern.
•
find
— search for the first occurrence of a pattern.
High Availability (HA) 915