Dell C9000 series, Reference Manual

Page: 88 / 2286

Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series and E-Series.
E-Series Original command.
Related
Commands exit — returns to the lower command mode.
exec-timeout
Set a time interval that the system waits for input on a line before disconnecting the session.
C9000 Series
Syntax
exec-timeout minutes [ seconds ]
To return to default settings, use the
no exec-timeout
command.
Parameters
minutes Enter the number of minutes of inactivity on the system before
disconnecting the current session. The range is from 0 to 35791.
The default is
10 minutes for the console line and 30 minutes
for the VTY line.
seconds (OPTIONAL) Enter the number of seconds. The range is from 0
to 2147483. The default is
0 seconds .
Defaults 10 minutes for console line; 30 minutes for VTY lines; 0 seconds
Command Modes LINE
Control and Monitoring 88