manualshive.com logo in svg

Dell C9000 series, Reference Manual

Share
Download
Dell C9000 series Reference Manual Download Page 859

fip-snooping port-mode fcf

Configure the port for bridge-to-FCF links.

C9000 Series

Syntax

fip-snooping port-mode fcf

To disable the bridge-to-FCF link on a port, use the 

no fip-snooping port-mode 

fcf

 command.

Command Modes

INTERFACE

Command History This guide is platform-specific. For command information about other platforms, see 

the relevant 

Dell Networking OS Command Reference Guide

.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.9(0.0)

Introduced on the C9010.

8.3.19.0

Introduced on the S4820T.

8.3.12.0

Introduced on the S4810.

Usage Information The maximum number of FCFs supported per FIP snooping-enabled VLAN is twelve.

NOTE: 

The 

fip-snooping port-mode fcf

 command is not supported on 

cascade interfaces or extended ports.

fip-snooping port-mode fcoe-trusted

Configure the port for bridge-to-bridge links.

C9000 Series

Syntax

fip-snooping port-mode fcoe-trusted

To remove the bridge-to-bridge link configuration from the port, use the 

no fip-

snooping port-mode fcoe-trusted

 command.

FCoE Transit

859

Summary of Contents for C9000 series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands