Dell C9000 series, Reference Manual

Page: 651 / 2286

show cam-acl
Display the details of the CAM profiles on the chassis and all stack units.
C9000 Series
Syntax
show cam-acl
Defaults none
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series.
Usage Information The display reflects the settings implemented with the
cam-acl
command.
Example
show cam-usage
Display the amount of memory space used and available in each CAM partition (including Layer 2 ACL, Layer
3 ACL, and IPv4Flow).
C9000 Series
Syntax
show cam-usage [acl | router | switch]
Content Addressable Memory (CAM) 651