Dell C9000 series, Reference Manual

Page: 544 / 2286

Version Platform Support
7.8.1.0 S-Series (MBGP for IPv4 Multicast Only)
8.2.1.0 E-Series ExaScale (MBGP)
debug ip bgp dampening
View information on routes being dampened.
C9000 Series
Syntax
debug ip bgp [vrf vrf-name ] [ipv4 {unicast | multicast} | ipv6
unicast] dampening
To disable debugging, use the
no debug ip bgp dampening
command.
Parameters
vrf vrf-name Enter the keyword
vrf
followed by the name of the VRF to view
information on dampened routes corresponding to that VRF.
ipv4 multicast (OPTIONAL) Enter the keyword
ipv4
followed by the keyword
multicast
to view dampened-route information related only
to ipv4 multicast routes.
ipv4 unicast (OPTIONAL) Enter the keyword
ipv4
followed by the keyword
multicast
to view dampened-route information related only
to ipv4 unicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword
ipv4
followed by the keyword
unicast
to view dampened-route information related only to
ipv6 unicast routes.
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
b
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
Border Gateway Protocol 544