Dell C9000 series, Reference Manual

Page: 523 / 2286

Example
Dell#show ip bgp flap-statistics
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 192.168.11.5
Status codes: s suppressed, S stale, d dampened, h history, *
valid, > best
Path source: I - internal, a - aggregate, c - confed-external, r
- redistributed
n - network, D - denied, S - stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Flaps
Duration Reuse Path
h 77.0.0.0/24 172.16.0.2 1
00:00:03 00:00:00
d 55.0.0.0/24 172.16.0.2 3
00:00:25 00:30:44 200 i
*> 66.0.0.0/24 172.16.0.2 1
00:00:23 00:00:00 200 i
Dell#*>n 66.66.77.77/32 0.0.0.0 0 32768 i
show ip bgp inconsistent-as
View routes with inconsistent originating autonomous system (AS) numbers; that is, prefixes that are
announced from the same neighbor AS but with a different AS-Path.
C9000 Series
Syntax
show ip bgp [ ipv4 unicast ] inconsistent-as
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Border Gateway Protocol 523