Dell C9000 series, Reference Manual

Page: 517 / 2286

AfNumAggrValidPfx 0 :
AfMPathRttP 0x41a0d700
MpathCtxAddr 1101111140 : MpathCtxAddrlen 255 : AfEorSet
0x41a19f98 : NumDfrdPfx 0
AfActPeerHd 0x41a1a3a4 : AfExtDist 1101112312 : AfIntDist 200 :
AfLocDist 200
AfNumRRc 0 : AfRR 0 : AfNetRttP 0x41a0d300 : AfNetCtxAddr
1101112392 :
AfNetCtxAddrlen 255
AfNwCtxAddr 1101112443 : AfNwCtxAddrlen 255 : AfNetBKDrRttP
0x41a0d500 :
AfNetBKDRCnt 0 : AfDampHLife 0
AfDampReuse 0 : AfDampSupp 0 : AfDampMaxHld 0 : AfDampCeiling 0 :
AfDampRmapP
show ip bgp extcommunity-list
View information on all routes with Extended Community attributes.
C9000 Series
Syntax show ip bgp [vrf vrf-name ] [ipv4 { multicast | unicast } | ipv6
unicast ] extcommunity-list [ list name ]
Parameters
vrf vrf-name (OPTIONAL) Enter the keywords
vrf
and then the name of the
VRF to view information on all routes with extended community
attributes corresponding to that VRF.
ipv4 multicast (OPTIONAL) Enter the keyword
ipv4
followed by the keyword
multicast
to view information related only to ipv4 multicast
routes.
ipv4 unicast (OPTIONAL) Enter the keywords
ipv4 unicast
to view
information only related to ipv4 unicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword
ipv6
followed by the keyword
unicast
to view information related only to ipv6 unicast routes.
list name Enter the extended community list name you wish to view. The
range is 140 characters.
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Border Gateway Protocol 517