Dell C9000 series, Reference Manual

Page: 504 / 2286

neighbor 123.34.55.123 peer-group suzanne
neighbor 123.34.55.123 shutdown
Dell(conf-router_bgp)#
Related
Commands capture bgp-pdu max-buffer-size — specifies a size for the capture buffer.
show ip bgp
View the current BGP IPv4 routing table for the system.
C9000 Series
Syntax
show ip bgp [vrf vrf-name ] [ ipv4 unicast ] [network [ network-mask ]
[longer-prefixes]]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword
vrf
and then the name of the
VRF to view ipv4–unicast route information corresponding to
that VRF.
ipv4 unicast (OPTIONAL) Enter the keywords
ipv4 unicast
to view
information only related to ipv4 unicast routes.
network (OPTIONAL) Enter the network address (in dotted decimal
format) of the BGP network to view information only on that
network.
network-mask (OPTIONAL) Enter the network mask (in slash prefix format) of
the BGP network address.
longer-prefixes (OPTIONAL) Enter the keywords
longer-prefixes
to view all
routes with a common prefix.
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048–ON and S4048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.4.(0.0) Added support for VRF.
Border Gateway Protocol 504