Dell C9000 series, Reference Manual

Page: 434 / 2286

bgp log-neighbor-changes
Enable logging of BGP neighbor resets.
C9000 Series
Syntax
bgp log-neighbor-changes
To disable logging, use the
no bgp log-neighbor-changes
command.
Defaults Enabled
Command Modes ROUTER BGP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.11.1 Introduced on the Z9000.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information To view BGP neighbor resets, use the
show logging
command in EXEC mode.
The
bgp log-neighbor-changes
command appears in the
show config
command
output.
Related
Commands show logging — views logging settings and system messages logged to the system.
bgp non-deterministic-med
Compare MEDs of paths from different autonomous systems.
C9000 Series
Syntax
bgp non-deterministic-med
Border Gateway Protocol 434