Dell C9000 series, Reference Manual

Page: 419 / 2286

Usage Information If you enable this command, use the
clear ip bgp *
command to recompute the
best path.
bgp bestpath as-path multipath-relax
Include prefixes received from different AS paths during multipath calculation.
C9000 Series
Syntax
bgp bestpath as-path multipath-relax
To return to the default BGP routing process, use the
no bgp bestpath as-path
multipath-relax
command.
Defaults Disabled
Command Modes ROUTER BGP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.4 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage Information The
bestpath router bgp configuration mode
command changes the default
bestpath selection algorithm. The
multipath-relax
option allows load-sharing
across providers with different (but equal-length) autonomous system paths. Without
this option, ECMP expects the AS paths to be identical for load-sharing.
bgp bestpath med confed
Enable MULTI_EXIT_DISC (MED) attribute comparison on paths learned from BGP confederations.
C9000 Series
Syntax
bgp bestpath med confed
Border Gateway Protocol 419