Dell C9000 series Reference Manual Download Page 398

Page: 398 / 2286

Defaults

BFD is disabled by default.

Command Modes

VRRP

Command History This guide is platform-specific. For command information about other platforms, see

the relevant

Dell Networking OS Command Line Reference Guide

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.9(0.0)

Introduced on the C9010.

9.2(1.0)

Introduced on the Z9500.

9.2(0.0)

Introduced on S4810.

9.0.0.0

Introduced on the Z9000.

8.3.19.0

Introduced on the S4820T.

8.2.1.0

Introduced on the E-Series ExaScale.

7.6.1.0

Introduced on the C-Series.

7.5.1.0

Introduced on the E-Series.

bfd enable (Configuration)

Enable BFD on all interfaces.

C9000 Series

Syntax

bfd enable

Disable BFD using the

no bfd enable

command.

Defaults

BFD is disabled by default.

Command Modes

CONFIGURATION

Command History This guide is platform-specific. For command information about other platforms, see

the relevant

Dell Networking OS Command Line Reference Guide

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.9(0.0)

Introduced on the C9010.

9.2(1.0)

Introduced on the Z9500.

Bidirectional Forwarding Detection (BFD)

398

Summary of Contents for C9000 series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for C9000 series

Reviews:

Related manuals for C9000 series

Brands by name

Popular brands

Dell C9000 series, Reference Manual

Search results

Summary of Contents for C9000 series

Reviews:

Related manuals for C9000 series

Brands by name

Popular brands