Dell C9000 series, Reference Manual

Page: 375 / 2286

Related
Commands show config — displays the current configuration.
set as-path
To modify the AS path for border gateway protocol (BGP) routes, configure a filter.
C9000 Series
Syntax
set as-path prepend as-number [... as-number ]
To remove an AS-Path setting, use the
no set as-path {prepend as-number |
tag}
command.
Parameters
prepend as-
number
Enter the keyword
prepend
and then enter up to eight AS
numbers to be inserted into the BGP path information. The
range is from 1 to 65535.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information You can prepend up to eight AS numbers to a BGP route.
This command influences best path selection in BGP by inserting a tag or AS number
into the AS_PATH attribute.
Access Control Lists (ACL) 375