Dell C9000 series, Reference Manual

Page: 333 / 2286

packets)
Extended mac access list m3
seq 5 permit host 11:11:11:11:11:11 host 22:22:22:22:22:22
snap eq 600
Dell#
Dell#show mac access-lists out
Standard mac access list m1
seq 5 permit 11:22:33:44:55:66 count (0 packets)
Standard mac access list m2
seq 5 deny any order 2
seq 10 permit 00:33:00:11:00:77 33:44:55:66:77:88 count (0
packets)
show mac accounting access-list
This command displays ACL Mac accounting information.
C9000 Series
Syntax
show mac accounting access-list {acl_name} {interface | cam_count}
Parameters
access-list Display accounting information of all L2 access-lists configured.
acl_name Display accounting information for specified access-list.
interface Display accounting information for L2 access-list attached to a
particular interface.
cam_count Display accounting information of L2 access-lists with
cam_count
.
Command Modes EXEC
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.1.1.0 Introduced on the E-Series ExaScale.
Access Control Lists (ACL) 333