Dell C9000 series, Reference Manual

Page: 323 / 2286

Version Description
9.3(0.0) Introduced on the S4810, S4820T, and Z9000.
Usage Information Enter a description for each ACL VLAN group that you create for effective
administrative and logging purposes.
ip access-group (ACL VLAN Group)
Apply an egress IP ACL to the ACL VLAN group.
C9000 Series
Syntax
ip access-group access-list-name out implicit-permit
Parameters
access-list-name Enter the name of the egress IP ACL to be applied to member
interfaces of the VLAN group (140 characters maximum).
out Enter the keyword
out
to apply the ACL to outgoing traffic.
implicit-permit
Enter the keyword
implicit-permit
to change the default
action of the ACL from implicit-deny to implicit-permit (that is, if
the traffic does not match the filters in the ACL, the traffic is
permitted instead of dropped).
Default None
Command Modes ACL-VLAN-GROUP CONFIGURATION (conf-acl-vl-grp)
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.0) Introduced on the Z9500.
9.3(0.0) Introduced on the S4810, S4820T, and Z9000.
Usage Information You can apply only an egress IP ACL on an ACL VLAN group.
member vlan (ACL VLAN Group)
Add VLAN members to an ACL VLAN group.
C9000 Series
Syntax
member vlan { VLAN-range }
Access Control Lists (ACL) 323