Dell C9000 series, Reference Manual

Page: 261 / 2286

Command Modes
INTERFACE
INTERFACE (BATCH MODE)
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
mac
Configure a list of supplicant MAC addresses for dot1x profile represented with a profile-name.
Syntax [no] mac { mac-address1 mac-address2 … mac-address6 }
Parameters
mac-address1
mac-address2
…
mac-address6
Enter the keyword
mac
and type the 48– bit MAC addresses
using the H.H.H format. A maximum of 6 MAC addresses are
allowed.
Defaults None
Command Modes
DOT1X PROFILE CONFIG (conf-dot1x-profile)
CONFIGURATION TERMINAL BATCH
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
802.1X 261