Dell C9000 series, Reference Manual

Page: 240 / 2286

Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.4.1.0 Introduced on the C-Series and S-Series.
dot1x auth-fail-vlan
Configure an authentication failure VLAN for users and devices that fail 802.1X authentication.
C9000 Series
Syntax
dot1x auth-fail-vlan vlan-id [max-attempts number ]
To delete the authentication failure VLAN, use the
no dot1x auth-fail-vlan
vlan-id [max-attempts number ]
command.
Parameters
vlan-id Enter the VLAN Identifier. The range is from 1 to 4094.
max-attempts
number
(OPTIONAL) Enter the keywords
max-attempts
followed
number of attempts desired before authentication fails. The
range is from 1 to 5. The default is
3 .
Defaults 3 attempts
Command Modes
CONFIGURATION ( conf-if-interface-slot/port )
CONFIGURATION TERMINAL BATCH
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
802.1X 240