Dell C9000 series, Reference Manual

Page: 224 / 2286

show os-version
Display the release and software image version information of the image file specified.
C9000 Series
Syntax
show os-version [ file-url ]
From a PE console , use
show os-version
to view the release and software image
information.
Parameters
file-url (OPTIONAL) Enter the following location keywords and
information:
• For a file on the internal flash, enter
flash://
then the
filename.
• For a file on an FTP server, enter
ftp://
user:password@hostip/filepath.
• For a file on an NFS-mounted system, enter
nfsmount: //
<mount-point/filepath>
NOTE: While switching to a remote NFS file system, it
is mandatory to specify the mount-point that indicates
the working directory on the NFS file system. You
cannot enter the root directory of the remote NFS file
system.
• For a file on a TFTP server, enter
tftp://hostip/filepath
.
• For a file on the USB port, enter
usbflash:// filepath
.
NOTE: The port extender information is displayed only
when the extended bridge feature is enabled.
Defaults none
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, see the
relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
File Management 224