Dell C9000 series, Reference Manual

Page: 215 / 2286

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on S-Series
7.5.1.0 Introduced on C-Series
E-Series Original command
Usage Information To rename a file in the local file system from a PE console, use the
rename {flash:
directory name/path | usbflash directory name/path }
command .
restore factory-defaults
Restore factory defaults on a switch.
C9000 Series
Syntax
restore factory-defaults {chassis {bootvar | clear-all | nvram}| domain
{bootvar | clear-all | nvram} | linecard {
slot-id | all} {bootvar|
clear-all | nvram} | pe { pe-id | all} {bootvar | clear-all | nvram}|
rpm { slot-id | all} {bootvar | clear-all | nvram}}
Parameters
chassis Enter the keyword
chassis
to reset all the RPMs and line modules
(LM).
domain Enter the keyword
domain
to reset all the RPMs, LM, and port
extenders (PE).
linecard slot-id Enter the keyword
linecard
and the slot-id number. The slot-id
range is from 0 to 11. Enter
linecard all
to reset all the linecards.
pe pe-id Enter the keyword
pe
and the port extender (PE) ID. The pe-id range is
from 0 to 255. Enter
pe all
to reset all the PEs.
rpm Enter the keyword
rpm
to rest the RPM card.
bootvar Enter the keyword
bootvar
to reset the boot environment variables
only.
clear-all Enter the keyword
clear-all
to reset the Bootvar, NvRam, and
configurations.
nvram Enter the keyword
nvram
to reset the NvRAM only.
File Management 215