Dell C9000 series, Reference Manual

Page: 2147 / 2286

territory
Configure the territory and set the coverage for the company site.
Syntax
territory company-territory
To remove the company territory information, use the
no territory
command.
Parameters
company-territory Enter the territory name for the company. To include a space,
enter a space within double quotes.
Command Modes SUPPORTASSIST COMPANY
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
Usage Information This command is optional for SupportAssist service configuration.
SupportAssist Person Commands
Dell Networking OS supports the following SupportAssist Person mode commands.
email-address
Configure the email addresses to reach the contact person.
Syntax
email-address primary email-address [alternate email-address ]
To remove an email address, use either the
no email-address primary
or
no
email-address alternate
commands.
Parameters
primary email-
address
Enter the keyword
primary
then the primary email address for
the person.
SupportAssist 2147