Dell C9000 series, Reference Manual

Page: 2146 / 2286

Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
Usage Information The optional parameters must be provided in the following order:
city state
country postalcode
. If specified in a different order, the command returns an error
as follows:
Dell(conf-supportassist-cmpy-test)# address city Minneapolis
postalcode 55344 country USA state Minnesota
^
% Error: Invalid input at "^" marker.
This command is optional for SupportAssist service configuration.
Example
Dell(conf-supportassist-cmpy-test)# address city Minneapolis state
Minnesota country USA postalcode 55344
street-address
Configure the street address information for the company.
Syntax
street-address { address1 } [ address2 ]…[ address8 ]
To remove the street address, use the
no street-address
command.
Parameters
address1 Enter the street address for the company.
address2..address
8 (OPTIONAL) Enter the street address of the company site. Up to
8 fields are allowed.
Command Modes SUPPORTASSIST COMPANY
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
Usage Information This command is optional for SupportAssist service configuration.
SupportAssist 2146