Dell C9000 series, Reference Manual

Page: 2129 / 2286

Version Description
7.5.1.0 Introduced on the C-Series.
7.4.1.0 E-Series Only: Added the
percentage decimal value
option.
6.5.1.0 Introduced on the E-Series.
storm-control multicast (Configuration)
Configure the packets per second (pps) of multicast traffic allowed into the C-Series and S-Series networks
only.
C9000 Series
Syntax
storm-control multicast packets_per_second in
To disable storm-control for multicast traffic into the network, use the
no storm-
control multicast packets_per_second in
command.
Parameters
packets_per_seco
nd
in
Enter the packets per second of multicast traffic allowed into the
network. The range is from 0 to 33554368.
Defaults none
Command Modes CONFIGURATION (conf)
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the C-series and S-Series.
Storm Control 2129