Dell C9000 series, Reference Manual

Page: 2120 / 2286

Port 28 (TenGigabitEthernet 1/3) is Forwarding
Port path cost 4, Port priority 8, Port Identifier 8.28
Designated root has priority 32768, address 0001.e800.0a56
Designated bridge has priority 32768, address 0001.e800.0a56
Designated port id is 8.28, designated path cost 0
Timers: message age 0, forward_delay 0, hold 0
Number of transitions to forwarding state 1
BPDU: sent:31, received 0
The port is not in the portfast mode
Dell#
Example (Brief)
Dell#show span 0 brief
Executing IEEE compatible Spanning Tree Protocol
Root ID Priority 32768
Address 0001.e800.0a56
Root Bridge hello time 2, max age 20, forward delay 15
Bridge ID Priority 32768,
Address 0001.e800.0a56
Configured hello time 2, max age 20, forward delay 15
Interface Designated
Name PortID Prio Cost Sts Cost Bridge ID PortID
-------------- ------ ---- ---- --- ----- ------------------
Te 1/1 8.26 8 4 FWD 0 32768 0001.e800.0a56 8.26
Te 1/2 8.27 8 4 FWD 0 32768 0001.e800.0a56 8.27
Te 1/3 8.28 8 4 FWD 0 32768 0001.e800.0a56 8.28
Dell#
Example (Guard)
Dell#show spanning-tree 0 guard
Interface
Name Instance Sts Guard type
--------- -------- --------- ----------
Te 0/1 0 INCON(Root) Rootguard
Te 0/2 0 LIS Loopguard
Te 0/3 0 EDS (Shut) Bpduguard
spanning-tree 0
Assigns a Layer 2 interface to STP instance 0 and configures a port cost or port priority, or enables loop
guard, root guard, or the Portfast feature on the interface.
C9000 Series
Syntax
spanning-tree stp-id {cost cost | | portfast [bpduguard [shutdown-
on-violation]] | priority priority }
To disable Spanning Tree group on an interface, use the
no spanning-tree stp-id
{cost cost | portfast [bpduguard [shutdown-on-violation]] |
priority priority }
command.
Spanning Tree Protocol (STP) 2120