Dell C9000 series, Reference Manual

Page: 2081 / 2286

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage Information When the number of messages reach the limit you set with the
logging history
size
command, older messages are deleted as newer ones are added to the table.
Related
Commands
show logging — displays information logged to the history buffer.
logging monitor
Specify which messages are logged to Telnet applications.
C9000 Series
Syntax
logging monitor [ level ]
To disable logging to terminal connections, use the
no logging monitor
command.
Parameters
level Indicate a value from 0 to 7 or enter one of the following
parameters:
emergencies
,
alerts
,
critical
,
errors
,
warnings
,
notifications
,
informational
, or
debugging
.
The default is 7 or debugging .
Defaults 7 or debugging
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
Simple Network Management Protocol (SNMP) and Syslog 2081