Dell C9000 series, Reference Manual

Page: 2067 / 2286

Usage Information The
oid-tree
variable is a full sub-tree starting from 1.3.6 and cannot specify the
name of a sub-tree or a MIB. The following Example configures a view named rview
that allows access to all objects under 1.3.6.1.
Example
Dell# conf
Dell#(conf) snmp-server view rview 1.3.6.1 included
Related
Commands show running-config snmp — displays the SNMP running configuration.
snmp-server vrf
Configures an SNMP agent to bind to a specific VRF.
C9000 Series
Syntax
snmp-server vrf vrf-name
To undo the SNMP agent configuration, use the
no snmp-server vrf vrf-name
command.
Parameters
vrf vrf-name Enter the keyword
vrf
and then the name of the VRF to
associate an SNMP agent with that VRF.
Defaults default
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S-Series and Z9000.
Usage Information Use this command to bind an SNMP agent to a VRF. The SNMP agent processes the
requests from the interfaces that belong to the specified VRF. If no VRF is specified,
then the default VRF is used.
Related
Commands show snmp user — displays the information configured on each SNMP user name.
Simple Network Management Protocol (SNMP) and Syslog 2067