Dell C9000 series, Reference Manual

Page: 1996 / 2286

Version Description
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information If you want to log in without being prompted for a password, log in through RSA
authentication. To do that, first add the SSHv2 RSA public keys to the list of authorized
keys. This command adds the specified RSA keys to the following file:
flash://
ADMIN_DIR/ssh/authorized-keys-username
(where
username
is the user
associated with this terminal).
NOTE: The
no
form of this command deletes the file
flash://ADMIN_DIR/
ssh/ authorized-keys-username
file.
Related
Commands
show ip ssh rsa-authentication — displays the RSA authorized keys.
ip ssh rsa-authentication (Config) — enables RSA authentication.
ip ssh server
Configure an SSH server. The SSH server is enabled by default.
C9000 Series
Syntax
NOTE: Some of the parameters in this command require licensing to access. For
more information, contact your Dell Networking representative.
ip ssh server {ciphers cipher-list } {enable | port port-number }
[kex key-exchange-algorithm ] [mac hmac-algorithm ] [version {1 |
2}]
To disable SSH server functions, use the
no ip ssh server {ciphers cipher-
list } {enable | port port-number } [kex key-exchange-algorithm ]
[mac hmac-algorithm ] [version {1 | 2}]
command.
Parameters
enable Enter the key word
enable
to start the SSH server.
ciphers cipher-list Enter the keyword
ciphers
and then a space-delimited list of
ciphers that the SSH server supports.
The following ciphers are available.
•
3des-cbc
•
aes128-cbc
•
aes192-cbc
Security 1996