Dell C9000 series, Reference Manual

Page: 1958 / 2286

Related
Commands radius-server host — configures a RADIUS host.
radius-server timeout
To reply to a request, configure the amount of time the RADIUS client (the switch) waits for a RADIUS host
server .
C9000 Series
Syntax
radius-server timeout seconds
To return to the default value, use the
no radius-server timeout
command.
Parameters
seconds Enter the number of seconds between an unsuccessful attempt
and when the system times out. The range is from zero (0) to
1000 seconds. The default is
5 seconds .
Defaults 5 seconds
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.0 Introduced on the E-Series.
Related
Commands radius-server host — configures a RADIUS host.
Security 1958