Dell C9000 series, Reference Manual

Page: 1956 / 2286

radius-server key
Configure a key for all RADIUS communications between the switch and the RADIUS host server.
C9000 Series
Syntax
radius-server key [ encryption-type ] key
To delete a password, use the
no radius-server key
command.
Parameters
encryption-type (OPTIONAL) Enter either zero (
0
) or
7
as the encryption type for
the key entered. The options are:
•
0
is the default and means the key is not encrypted and
stored as clear text.
•
7
means that the key is encrypted and hidden.
key Enter a string that is the key to be exchanged between the
switch and RADIUS servers. It can be up to 42 characters long.
Defaults Not configured.
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Authentication key length increased to 42 characters.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.0 Introduced on the E-Series.
Usage Information The key configured on the switch must match the key configured on the RADIUS server
daemon.
Security 1956