Dell C9000 series, Reference Manual

Page: 1938 / 2286

Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information Only Dell Networking Technical Support staff use this command.
enable secret
Change the password for the
enable
command.
C9000 Series
Syntax
enable secret [level level ] [ encryption-type ] password
To delete a password, use the
no enable secret [ encryption-type ] password
[level level ]
command.
Parameters
level level (OPTIONAL) Enter the keyword
level
then a number as the
level of access. The range is from 1 to 15.
encryption-type
(OPTIONAL) Enter the number
5
or
0
as the encryption type.
Enter a
5
then a text string as the hidden password. The text
string must be a password that was already encrypted by a Dell
Networking router.
Use this parameter only with a password that you copied from
the
show running-config
file of another Dell Networking
router.
Security 1938